Rexroth S10P15-1X check valve

Dynamic (Cr):2764.2 kN; Static (Cor):4882.5  ; B:260 mm; Pu:395.830 kg; B1:176 mm; d:280 mm; D:500 mm; Weight:175  ; Bearing designation:PLC 512-40  ;

PG:1/4 NPT; Bearing:1317; J1:60.325 mm; h:47.625 mm; PosiTrac Plus contact element (db shaft position):B10724-109; Initial grease fill:365.71 g; Pa:27.6 kN; Lock washer:W 17; Lock nut:AN 17; Labyrinth ring (dc shaft position):LOR 188;

Appropriate attachment bolt, rec. tightening torque:2280 N·m; Da:580 mm; Eye bolt, size:2 x M 30; Mass housing:427 kg; Q120°:4200 kN; N:50 mm; Q150°:2400 kN; P55°:7500 kN; Cap bolt, size:M 36x240; Cap bolt, rec. tightening torque:600 N·m;

h:42.069 mm; H2:44.45 mm; S:4.763 mm; Max. speed for PosiTrac Plus seal:1650 r/min; Adapter sleeve assembly:SNW 20x3.7/16; Initial grease fill:181.44 g; R2:30.163 mm; Cap bolt, SAE grade:8; H1:114.3 mm; J max.:333.375 mm;

Grease Speed Rating n1:7000 rpm; Sealed Speed Rating n3:7000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:20400 N; Accessories:One Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:28600 N; B:27.00 mm; Oil Speed Rating n2:9500 rpm; d:30.000 mm; D:62.0000 mm;

J min.:295.275 mm; N1:25.4 mm; End plug (suffix Y):EPR 12; Cap bolt recommended tightening torque:203.4 N·m; R1:58.737 mm; H1:114.3 mm; A1:111.125 mm; ba:38.894 mm; P90°:81.4 kN; da:88.9 mm;

D:54.0000 mm; Fillet Radius ra:0.79 mm; d:28.600 mm; Width Plain B:9.5 mm; Basic Static Radial Load Rating Co:7500 N; Oil Speed Rating Open/Shielded n2:14000 rpm; Basic Dynamic Radial Load Rating C:12500 N; Shielded or Sealed B1:12.7 mm; Sealed Speed Rating n3:7900 rpm; Accessories:One Seal;

rb max.:2.5 mm; Limiting speed:4300 r/min; Fatigue load limit Pu:33.5 kN; D:184.15 mm; E:165 mm; s max.:1.5 mm; Limiting value e:0.2; Basic dynamic load rating C:233 kN; Mass bearing:3.7 kg; ra max.:2.5 mm;

rb max.:3.3 mm; Reference speed:7000 r/min; db min.:47.5 mm; D:76.2 mm; C:23.02 mm; Basic static load rating C0:106 kN; Limiting speed:8500 r/min; Mass bearing:0.66 kg; r3,4 min.:3.3 mm; ra max.:3.5 mm;

B:269.875 mm; T:269.875 mm; r3,4 min.:6.4 mm; Basic dynamic load rating C:6270 kN; d1 ≈:585 mm; D1 ≈:675 mm; Fatigue load limit Pu:1100 kN; Calculation factor Y0:2; Calculation factor e:0.33; Calculation factor Y1:2;

s max.:6 mm; Fatigue load limit Pu:196 kN; B:80 mm; Limiting speed:850 r/min; Basic dynamic load rating C:858 kN; E:356.7 mm; d:300 mm; Da max.:370 mm; Reference speed:700 r/min; Basic static load rating C0:2120 kN;

Accessories:Two Seals; Sealed Speed Rating n3:950 rpm; Fillet Radius ra:4.00 mm; B:65.00 mm; d:380.000 mm; Oil Speed Rating Open/Shielded n2:1300 rpm; D:520.0000 mm; Basic Static Radial Load Rating Co:530000 N; Basic Dynamic Radial Load Rating C:338000 N; Grease Speed Rating Open/Shielded n1:1000 rp

Accessories:8000 One Seal; Old MRC Bearing Number:204FS; Speed Rating-Single and Double Sealed Grease SDG:10000 rpm; Basic Radial Load Rating-Dynamic DC:13000 N; Width - Inner Ring B1:15.20 mm; D:47.0000 mm; Fillet Radius ra:1.00 mm; Basic Radial Load Rating-Static SCO:6700 N; Width - Outer Ring B0:

Fillet Radius ra:1.00 mm; B:25.40 mm; Oil Speed Rating n2:10000 rpm; Basic Dynamic Radial Load Rating C:34100 N; D:62.0000 mm; d:25.000 mm; Grease Speed Rating n1:7500 rpm; Accessories:Two Seals; Sealed Speed Rating n3:7500 rpm; Basic Static Radial Load Rating Co:30500 N;

Mass needle roller and cage assembly:0.01 kg; Basic static load rating C0:12.5 kN; Designation associated G design radial shaft seal with a low cross-sectional height:G 16x22x3; Limiting speed:26000 r/min; Fw:16 mm; Designation associated SD design radial shaft seal with a low cross-sectional height