VOLVO 478486 injector

d2 ≈:549 mm; K:12 mm; ra max.:5 mm; B1:237 mm; Basic static load rating C0:6800 kN; Ba min.:18 mm; B5:77 mm; db min.:499 mm; b:22.3 mm; Mass bearing + sleeve:275 kg;

Da min.:48.5 mm; Lubricant:Regular relubricatio; M:2.5 mm; b1:3.9 mm; Specific static load factor K0:500 N/mm²; Sealing solution:Triple-lip seals; α:6 °; Mass plain bearing:0.23 kg; Basic static load rating C0:400 kN; ra max.:0.6 mm;

Appropriate attachment bolt size G:0.625 in; Da:130 mm; P150°:25.4 kN; S:3.175 mm; Cap bolt, SAE grade:5; Initial grease fill:68.04 g; Housing:SAF 215; L:285.75 mm; P180°:30.2 kN; R1:46.038 mm;

d:10.000 mm; Fillet Radius ra:0.60 mm; B:18.00 mm; D:30.0000 mm; Oil Speed Rating n2:67000 rpm; Basic Dynamic Radial Load Rating C:11900 N; Grease Speed Rating n1:44000 rpm; Fillet Radius rb:0.30 mm; Basic Static Radial Load Rating Co:6400 N;

Calculation factor Y2:3.3; Calculation factor Y1:2.2; Abutment diameter shaft db min.:64 mm; Fatigue load limit Pu:30.5 kN; Limiting speed:7000 r/min; r5 min.:0.6 mm; r1,2 min.:1.5 mm; C:47 mm; Abutment housing - axial space at the small side face/ both sides of the outer ring Cb min.:6 mm; l:5 mm;

Ew:33 mm; Limiting speed:17000 r/min; Mass needle roller and cage assembly:0.033 kg; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 25x33x4; Basic dynamic load rating C:27.5 kN; Basic static load rating C0:38 kN; Designation associated G design radial shaft s

B:98 mm; D:360 mm; Static (Cor):16.7 mm; rs (min):4 mm; Oil:157.600 kN; Pu:1160 kN; Grease:1760 kN; Dynamic (Cr):9 mm; with cylindrical bore:890 min-1; with tapered bore:1 100 min-1;

Fillet Radius ra:0.64 mm; B:12.00 mm; Grease Speed Rating n1:10000 rpm; Oil Speed Rating n2:15000 rpm; Basic Dynamic Radial Load Rating C:14300 N; d:40.000 mm; D:62.0000 mm; Basic Static Radial Load Rating Co:11600 N; Fillet Radius rb:0.15 mm;

r3,4 min.:5 mm; Calculation factor Y1:0.94; Thrust factor K:0.8; Calculation factor e:0.72; h:25.4 mm; Calculation factor Y0:0.9; Design variant/feature:TDIS/N; T:160 mm; Basic dynamic load rating C:2556 kN; b:51.3 mm;

Oil Speed Rating n2:3600 rpm; B:49.20 mm; Grease Speed Rating n1:2600 rpm; d:85.000 mm; D:150.0000 mm; Basic Static Radial Load Rating Co:110000 N; Sealed Speed Rating n3:2600 rpm; Fillet Radius ra:2.00 mm; Accessories:One Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:124000 N;

bb:203 mm; L:1220 mm; d2:615 mm; H:835 mm; bc:243.5 mm; P0°:8000 kN; Ca:246 mm; Cap bolt, rec. tightening torque:850 N·m; s:35 mm; H1:420 mm;

Oil Speed Rating n2:2200 rpm; Fillet Radius ra:2.50 mm; d:140.000 mm; Basic Static Radial Load Rating Co:430000 N; Grease Speed Rating n1:1600 rpm; D:250.0000 mm; B:84.00 mm; Basic Dynamic Radial Load Rating C:319000 N; Fillet Radius rb:1.00 mm;

B:22.20 mm; Basic Dynamic Radial Load Rating C:20800 N; D:52.0000 mm; d:25.000 mm; Grease Speed Rating n1:8000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:14000 N; Accessories:Two Shields; Oil Speed Rating n2:11000 rpm; Sealed Speed Rating n3:8000 rpm;

Basic static load rating C0:108 kN; Number of balls z:27; Calculation factor f0:16.4; ra max.:1.5 mm; Db max.:176 mm; Preload class A GA:350 N; Attainable speed for grease lubrication:8500 r/min; Da max.:173 mm; Preload class C GC:1400 N; Static axial stiffness, preload class A:152 N/µm;